Sankyo Pachinko Machine Jackpot Rocker Arm - Blue Plastic

Often the bottom part of the rocker arm with the metal plate will break off the machine. We have replicated the entire rocker arm. See pictures below.

NOTE: If you are missing the entire rocker arm on your Sankyo machine, see the picture on the bottom of this page to determine if you need the Blue Plastic or the Clear Plastic rocker arm. You will also need a pin to attach your rocker arm to your machine which you purchase separately.

Pricing information for this part.

Pictures of the Original and Replica Rocker Arm Installed

 

Pictures of the Original and Replica Rocker Arm, Side by Side

 

Pictures of the Rocker Arm Extension

IMPORTANT NOTE! We have found a couple Sankyo pachinko machines where there is a small extension glued to the end of the blue rocker arm. We include this extension in case you need it. If when you load your machine with balls and you get jackpots, if the jackpot assembly doesn't reset after paying out the balls every time, then you will need to glue this extension on with superglue. See pictures below.

The following picture shows one rocker arm with a small extension glued to it.

This picture shows our replica and we include an extension in case you need it.

 

How to Determine if You Need the Clear or Blue Rocker Arm

If your machine is missing the rocker arm, you can determine which replacement you need by looking at the bottom of the jackpot assembly. If the sides are curved or rounded you need the Blue rocker arm. If they are square or straight you need the Clear rocker arm. You will also need a PIN to mount the rocker arm to the jackpot assembly.