About This Microswitch
This microswitch is great for replacing your supply tray microswitch or leaf style switch. The spring within the switch requires a lot more pressure then our long-arm switch so it is not recommended as a replacement for a jackpot switch.
Basic Installation Instructions
Remove all your old electrical components. Hold the microswitch in place and test filling the supply tray to make sure it activates or deactivates the switch. You may have to trim away a plastic post on the machine if it is in the way of the best position for your switch.
Connect the positive from your battery or transformer to the common 'C' post on the switch. Then connect a wire to the normally closed 'NC' post or the normally open 'NO' post on the switch and that wire will be connected to the side of each light bulb. Run the negative from the battery or transformer to the bottom of the light bulbs.
If you are unsure of any of these steps, our electronics manuals cover installation of these parts in detail.