Pachinko Repair and Restoration Service
One of the biggest problems with these old pachinko machines is that the inside ball tracks get clogged with dirt and the metal parts get rusty and corroded, making the pachinko machines unplayable.
Our Restoration Process
- We disassemble the pachinko machine.
- Plastic parts are cleaned.
- Large metal parts are cleaned by hand.
- Small metal parts are cleaned in a polishing machine.
- Staples are replaced with screws.
- Old screws are replaced with new ones.
- The outer cabinet and playfield are cleaned.
- Our 2 hour Pachinko Instruction Manual DVD is included.
- View full details and pictures of restoration process
Cost for Restoration Service
The base charge for restoration is $350. After we receive and evaluate your machine, the cost could go up if there is damage or missing parts. In addition to this base price, please add the cost for any optional items below.
You will also need to pay to have the machine shipped to us and a flat rate of $75 to have it packaged, insured and shipped back to you. Or you can drop the machine off to avoid shipping.
Payment is not required until we complete your machine and send you an invoice. Payment is required within 60 days of invoice otherwise your machine will be considered abandoned and we may sell it to recoup our costs.
Optional Items:
- The Plexiglas/Plastic in the door can be replaced for $20.
- Lights can be wired to a 9 volt battery for $20 or to a 110 volt transformer for $35.
- 500 Pachinko balls and a tray/bucket with lid can be included for $30.
- The outside frame can be painted dark brown for $10. (see comparison picture below)
- Support stands or cabinet (price varies).
How to Ship Your Pachinko Machine
Please don't ship the machine with real glass. We have some pictures on how to open the playfield door to remove the glass.
Make sure there is plenty of packing material, (peanuts, bubble wrap, etc.) to fill all the space in the box to prevent movement and possible damage. We also screw a couple boards to the top and bottom of the machine so it is centered in the box and prevents movement.
Mark your box, "This Side Up" on all sides with the machine standing up. Otherwise if it is laying down, other boxes can be stacked on top and can crush the front and back trays, even without damaging the box.
We use boxes that are 12x24x36. You may be able to use a flat screen TV box. Shipping is usually calculated based on weight AND box size so keep your size close to the above dimensions to minimize your cost.
We use Federal Express Ground but you can ship to us with any service. If you have a place such as the UPS Store package or ship it for you, the rates may be higher.
Ship to Our Mailing Address
Vintage Pachinko, LLC
11703 Huebner Rd.
Suite 106-257
San Antonio, TX 78230
(210) 897-7844
How Long it Takes to Restore a Pachinko Machine
It takes about 40 hours but that is spread over a couple of weeks. It also depends on how many customers have already sent us machines.
We repair machines in order that we receive them. When we receive your machine, we will evaluate it for any problems, and send you an estimate of how long should take to restore your machine.
If you have other questions, please contact us.